JUAL MURAH ARDUINO UNO R3 DAN PERANGKATNYA

Add a review

Descriptions

JUAL MURAH ARDUINO UNO DAN PERANGKATNYA

Nama BarangKodeJumlahHargaKabel Dupont Female to Female 20 pcsDUP-FF5 100.000 Kabel Dupont Female to Male 20 pcs,DUP-FM5 100.000 Kabel Jumper Breadboard, 1 paket 65pcs kabelJUMP651 65.000 Kabel Jumper Dupont Male to Male 20 pcsDUP-MM5 100.000 Breadboard Power SupplyBRPW24 100.000 Jack DC Male to TerminalJDCM015 25.000 Power Supply BreadboardBRPW12 50.000 Adaptor 9V untuk UnoADP-9V061 35.000 Timah Solder Dekko 50grDK50GR1 65.000 Solder Dekko 30W OriginalDCS301 120.000 Penyedot TimahSDT011 20.000 Header Male 40 PinHDR40M10 30.000 Header Female 40 PinHDR40F10 30.000 PCB Lubang Dua Layer 2 x 8 cmPCB2X8DL5 22.500 450022500PCB Lubang Dua Layer 3 x 7 cmPCB3X7DL5 30.000 PCB Lubang 15 x 7PCB15072 20.000 Breadboard 400 TitikBBRD21 35.000 Mini Breadboard 170 TitikBBRD32 30.000 Total 977.500





The Arduino Uno R3 is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs). Programs can be loaded on to it from the easy-to-use Arduino computer program. The Arduino has an extensive support community, which makes it a very easy way to get started working with embedded electronics. The R3 is the third, and latest, revision of the Arduino Uno.

Overview

The Arduino Uno is a microcontroller board based on the ATmega328. It has 20 digital input/output pins (of which 6 can be used as PWM outputs and 6 can be used as analog inputs), a 16 MHz resonator, a USB connection, a power jack, an in-circuit system programming (ICSP) header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features an ATmega16U2 programmed as a USB-to-serial converter. This auxiliary microcontroller has its own USB bootloader, which allows advanced users to reprogram it.

The Arduino has a large support community and an extensive set of support libraries and hardware add-on “shields” (e.g. you can easily make your Arduino wireless with our Wixel shield), making it a great introductory platform for embedded electronics. Note that we also offer a SparkFun Inventor’s Kit, which includes an Arduino Uno along with an assortment of components (e.g. breadboard, sensors, jumper wires, and LEDs) that make it possible to create a number of fun introductory projects.

This is the 3rd revision of the Uno (R3), which has a number of changes:

    The USB controller chip changed from ATmega8U2 (8K flash) to ATmega16U2 (16K flash). This does not increase the flash or RAM available to sketches.
    Three new pins were added, all of which are duplicates of previous pins. The I2C pins (A4, A5) have been also been brought out on the side of the board near AREF. There is a IOREF pin next to the reset pin, which is a duplicate of the 5V pin.
    The reset button is now next to the USB connector, making it more accessible when a shield is used.

More information about the Arduino Uno R3 is available on Arduino’s website.

Similar Products

9202108198944318216

Add a review